Keysight U8903B User Manual page 532

A Appendixes
Table A-30 Measurement settings > SMPTE Level Sweep menu tree description (continued)
Tab Level 1
Freq Lock
Upper Freq
Lower Freq
SMPTE Level Sweep
(Signal Analysis)
Sample Size
Input Range
– SMPTE Ratio
– SMPTE Ratio Vs Measured Amplitude
532
Level 2 Level 3
– Gen Lock
– Custom
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Description
Select the searching method for the upper and
lower frequencies.
Set the upper fundamental frequency value. This
setting is only available when Freq Lock is set to
Custom.
Set the lower fundamental frequency value. This
setting is only available when Freq Lock is set to
Custom.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Graph" on page 549 for the graph
menu tree.
Keysight U8903B User's Guide