Measurement Characteristics; Measurement Speed - Keysight N1913B EPM Series Service Manual

Measurement Characteristics

Measurement speed

Over the GPIB, three measurement speed modes are available as shown, along
with the typical maximum measurement speed for each mode:
– Normal: 20 readings/second
– x2: 40 readings/second
– Fast
Maximum measurement speed is obtained using binary output in free run trigger
mode.
[1] For N1914B, if both channels are used in the fast mode, the measurement speed will be reduced
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
[1]
: 400 readings/second, for Keysight E-Series power sensors only
to 200 readings/second for each channel.
Specifications and Characteristics 1
41