Plot Settings; Table 6-6 Sweep > Plot View > Plot Settings Menu Description - Keysight U8903B User Manual

Plot settings

Figure 6-7
Table 6-6 Sweep > Plot View > Plot Settings menu description
Menu Description
Press the Data Channel softkey to select the trace data channel number to be plotted. This setting is only available when
Data Channel
the measured channels are more than one channel.
Press the Y Data softkey to select the Y-axis trace data source.
– S: <sweep parameter>
– F1: <measurement function 1>
Y Data
– F2: <measurement function 2>
– F3: <measurement function 3>
– F4: <measurement function 4>
Press the Y2 Data softkey to select the second Y-axis trace data source.
– S: <sweep parameter>
– F1: <measurement function 1>
Y2 Data
– F2: <measurement function 2>
– F3: <measurement function 3>
– F4: <measurement function 4>
Press the X Data softkey to select the X-axis trace data source.
– S: <sweep parameter>
– F1: <measurement function 1>
X Data
– F2: <measurement function 2>
– F3: <measurement function 3>
– F4: <measurement function 4>
Keysight U8903B User's Guide
Sweep > Plot View > Plot Settings menu page
Sweep Function 6
287