Filters Configuration (Digital Analyzer); Table 4-24 Digital Analyzer > Filter Config Menu Description - Keysight U8903B User Manual

4 Audio Analyzer Measurement Functions

Filters Configuration (Digital Analyzer)

Filters are used to bandwidth limit the input signals before applying a measurement
function. The filter configuration for digital analyzer is displayed as shown in Figure 4-53.
Figure 4-53
Table 4-24 Digital Analyzer > Filter Config menu description
Menu Description
Clear Fil ters Press the Clear Fil ters softkey to clear all the filter settings.
Press the LPF softkey to select the low-pass filter.
– None
– 15 kHz
LPF – 20 kHz
– 22 kHz
– 30 kHz
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
Press the HPF softkey to select the high-pass filter.
– None
– 20 Hz
HPF
– 100 Hz
– 400 Hz
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
234
Digital Analyzer > Filter Config menu page
561 for more information.)
561 for more information.)
Keysight U8903B User's Guide