Appendix 4: Analog Generator Menu Tree; Table A-4 Analog Generator Menu Tree Description - Keysight U8903B User Manual

A Appendixes

Appendix 4: Analog Generator Menu Tree

Table A-4 Analog generator menu tree description
Level 1 Level 2
– Sine
– V. Phase
– Dual
– SMPTE 1:1
– SMPTE 4:1
– SMPTE 10:1
– IEC 60118
– IEC 60268
Waveform – Gaus. Noise
– Rect. Noise
– Pink Noise
– Square
– DC
– Sine Burst
– Arbitrary
– Multitone
– DTMF
Amplitude
Waveform Config
Frequency
(Sine)
DC Offset
Amplitude
Frequency
Waveform Config
(V. Phase)
Phase -> 1
Amplitude
Frequency
Frequency 2
Waveform Config
DC Offset
(Dual)
Ratio
Summation
428
Level 3 Description
Select the waveform type.
Set the signal amplitude value.
Set the signal frequency value.
Set the signal DC offset value.
Set the signal amplitude value.
Set the signal frequency value.
This is only available when the analog generator is in channel 2.
Set the phase of the channel 2 sine waveform with reference to channel 1.
Set the signal amplitude value.
Set the signal frequency value.
Set the second sine wave signal frequency value.
This setting is only applicable for the dual waveform.
Set the signal DC offset value.
Set the ratio of the amplitude of the second sine wave over the first sine
wave.
– RSS
Summation refers to the method to sum up two levels.
– Linear
Keysight U8903B User's Guide