Properties; Table 7-62 Tsa > Report > Properties Menu Description - Keysight U8903B User Manual

7 Test Sequence Application

Properties

Figure 7-64
Table 7-62 TSA > Report > Properties menu description
Menu Description
Auto Save Press the Auto Save softkey to enable or disable saving the report automatically at the end of a test sequence.
Press the Format softkey to select the report file format to be saved.
Format – Docx
– Html
Press the Name Option softkey to select the naming convention of the file name for the automatically saved report.
– Timestamp
Save the report in a time stamp suffix file name.
Name Option
– Numeric
Save the report in a numerical suffix file name that increments with each save.
– Prompt
Prompts for the file name at the end of a test sequence.
Prefix Press the Prefix softkey to set the prefix for the file name.
Press the Location softkey to select the folder for the automatically saved report. Refer to "Location" on page
Location
more information.
404
TSA > Report > Properties menu page
405 for
Keysight U8903B User's Guide