Keysight U8903B User Manual page 425

Table A-3 SYSTEM panel menu tree description (continued)
Key Level 1
Save Traces
Utility
(if the mode is in
Graph Analysis mode)
Recall
Copy To
Copy Graph From
File Explorer
Help
(Shift + Utility)
Error Info
System
I/O
Keysight U8903B User's Guide
Level 2 Level 3
Trace (x)
(x) = current trace
number
All Traces
Axis Settings
Traces + Axis
Save Trace (x) Data
(x) = current channel
Load File
Reset
Hostname
Config Mode
LAN Settings
IP Address
Subnet mask
Gateway
DNS 1
DNS 2
GPIB 0 to 30
Appendixes
Description
Save the active trace to a CSV file format.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Save all traces state to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Save the axis settings state to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Save all traces and axis settings states.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Save the active trace data to a CSV file format.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Load a trace from a CSV file into the active trace.
Refer to "Append ix 13: Recall Menu Tree" on
page 494 for the recall menu tree.
Copy the current channel graph state to other
channel(s).
Select a channel number to copy the graph state
to the current channel.
Rename, delete, copy, or move files.
Display the help mode.
Press Shift + Utility to close the help mode.
Select the log file to be loaded in the error log
viewing panel.
Refer to "Append ix 13: Recall Menu Tree" on
page 494 for the recall menu tree.
Reset the LAN settings.
Set the LAN hostname.
Select the LAN configuration mode.
– Auto
– Manual
Set the LAN IP address.
Set the LAN subnet mask address.
Set the LAN gateway address.
Set the LAN DNS 1 address.
Set the LAN DNS 2 address.
Set the desired GPIB address.
A
425