Table A-23 Measurement Settings > Dfd Imd Menu Tree Description - Keysight U8903B User Manual

DFD IMD
Table A-23 Measurement settings > DFD IMD menu tree description
Tab Level 1
Waveform
Output
DFD IMD
(Signal Generation)
Waveform Config
DFD order
Sample Size
DFD IMD
(Signal Analysis)
Input Range
DFD Ratio
Keysight U8903B User's Guide
Level 2 Level 3
– IEC60118
– IEC60268
– Enable
Track 1st Ch
– Disable
Upper Freq
Center Freq
Diff Freq
Amplitude
DC Offset
– 2nd
– 3rd
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Appendixes
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the upper frequency value.
Set the center frequency value.
Set the difference frequency value.
Set the amplitude value.
Set the DC offset value.
Select the distortion order to be measured.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
menu tree.
A
for the bar chart
515