Rear Panel; Table 1-4 U8903B Rear Panel Description - Keysight U8903B User Manual

1 Getting Started

Rear panel

1 2
17 16
Figure 1-2
Table 1-4 U8903B rear panel description
Item
1 Monitor 1
2 Monitor 2
3 Analog analyzer input (channels 3 and 4)
4 Bluetooth RF ports
5 Digital analyzer input and output (AES3)
6 Digital analyzer input and output (SPDIF)
7 Sync in
8 LAN port
40
3
U8903B rear panel
Description
Outputs a scaled signal of the analog analyzer channels 1, 3, 5, and 7 input signals. The
scaled signal can then be connected to an external amplifier or other measurement
instruments.
Outputs a scaled signal of the analog analyzer channels 2, 4, 6, and 8 input signals. The
scaled signal can then be connected to an external amplifier or other measurement
instruments.
Expandable up to 6 analog input channels. Refer to "U8903B Options" on page 37.
Receives analog audio signal using a female XLR input connector for balanced input and a
female BNC input connector for unbalanced input. The input connectors are available for each
channel.
For all applicable Bluetooth options, refer to "U8903B Options" on page 37.
Receives and transmits audio signal through the RF1 and RF2 connectors. The RF1 connector
is the default port and the RF2 port can be selected in the U8903B's GUI. Only one RF port
can be used at a time.
This is only applicable for option U8903B-DGT.
Receives and outputs digital audio signal using a female XLR input connector and a male XLR
output connector respectively.
This is only applicable for option U8903B-DGT.
Receives and outputs digital audio signal using a TOSLINK input connector and a TOSLINK
output connector respectively.
This is only applicable for option U8903B-DGT.
Receives an external sync in clock/frame signal using a female BNC input connector
(for digital audio only).
Allows the U8903B to be controlled remotely over the LAN interface.
6 7
4 5
15
8 9 10
14 13 12 11
Keysight U8903B User's Guide