Figure 2-34 System > Board Info Menu Page - Keysight U8903B User Manual

2 Operation and Features
Board Info
Press the Board Info softkey to display the U8903B available cards information.
Figure 2-34
Legacy Sweep
Press the Legacy Status softkey to enable or disable the legacy sweep.
When the legacy sweep is enabled, sweep is limited to analog and the sweep channel for
the analyzer and generator is paired. For example, analog generator channel 1 is measured
by analog analyzer channel 1.
When legacy sweep is disabled, you can select multiple channels to be swept and the
channels for generator and analyzer are not required to be paired.
92
System > Board Info menu page
Keysight U8903B User's Guide