Keysight U8903B User Manual page 427

Table A-3 SYSTEM panel menu tree description (continued)
Key Level 1
HP8903B Config
System
Fan & Temperature
Aux Output
Board Info
Legacy Status
Macro
(Shift + System)
Local
Lock/Unlock
Keysight U8903B User's Guide
Level 2 Level 3
– 1
Active Channel
– 2
– None
– A-Weighing
– CCIR 1k wtd
Left Filter – CCIR 2k wtd
– C-Message
– CCITT
– 400 Hz
– None
– A-Weighing
– CCIR 1k wtd
Right Filter – CCIR 2k wtd
– C-Message
– CCITT
– 400 Hz
– None
Default LPF – 30 kHz
– 80 kHz
– On
Audio Monitor
– Off
– Speaker
Audio Output
– Phone
– Stereo
Audio Mode
– Mono
Volume 0 to 100
DC Output
– On
– Off
Appendixes
Description
Select the HP8903B active channel.
Select the left filter type.
Select the right filter value.
Select the default filter for the HP8903B mode.
Display the temperatures of the available cards
and the speed of the three 80 mm fans in the
U8903B.
Enable or disable the aux audio monitor.
Select the aux audio output type.
This is only available when audio output is Phone.
Select the aux audio mode type.
Select the aux audio volume.
Set the aux DC output value.
Display the U8903B available cards information.
Enable or disable the legacy sweep.
Reserved for future expansion.
Switch from remote control mode to local mode.
The front panel keys are locked in the remote
mode.
Lock or unlock the front panel keys in the local
mode.
A dialog box will pop-up for confirmation.
A
427