Keysight U8903B User Manual page 445

Table A-6 Bluetooth generator menu tree description (continued)
Level 1 Level 2
Waveform Config
Voltage
(Constant)
Amplitude
DC Offset
Waveform Config
(Abitrary)
Load File
Info
Amplitude
DC Offset
Start Freq
Stop Freq
Freq Spacing
Waveform Config
(Multitone)
Tones Count
Length
Keysight U8903B User's Guide
Level 3 Level 4
– Linear
– Log
– Custom
– 1024
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
Appendixes
Description
Set the signal voltage value.
Set the signal amplitude value.
Set the signal DC offset value.
Load a waveform from a file.
Refer to "Append ix 13: Recall Menu Tree" on
page 494 for the recall menu tree.
Display the loaded waveform information.
Set the signal amplitude value.
Set the signal DC offset value.
Set the lowest frequency in the multitone waveform
which is usually the frequency for the first tone.
Set the highest frequency in the multitone waveform
which is usually the frequency for the last tone.
Select frequency spacing between the tones.
Custom is selected when the custom multitone
waveform is set.
Set the number of signal frequency components.
Select the waveform length that determines the number
of samples used to create one iteration of the multitone
waveform.
A
445