Measurement Settings; Table A-15 Measurement Settings > Ac Level Menu Tree Description - Keysight U8903B User Manual

Measurement settings

AC level
Table A-15 Measurement settings > AC Level menu tree description
Tab Level 1
Waveform
Output
AC Level
(Signal Generation)
Waveform Config
Detector
AC Level
(Signal Analysis)
LPF
Keysight U8903B User's Guide
Level 2 Level 3
Sine
Variable Phase
Square
Arbitrary
– Enable
Track 1st Ch
– Disable
Frequency
Amplitude
DC Offset
Phase->1st Ch
– RMS
– Pk-Pk
– None
– 2 kHz
– 3 kHz
– 5 kHz
– 8 kHz
– 10 kHz
– 15 kHz
– 20 kHz
– 22 kHz
– 30 kHz
– 40 kHz
– 50 kHz
– 80 kHz
– Custom
Appendixes
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Set the phase value. This setting is only available
when channel 2 is selected.
Select the AC level detector type.
Select the low-pass filter.
A
503