7
Test Sequence Application
Measurements
The U8903B allows up to 20 results in a single measurement. You can move a selected
measurement within the same test sequence. An example of the measurement menu page
is displayed as shown in Figure 7-15.
Figure 7-15
Table 7-14
TSA > Project > Test > Measurement menu description
Menu
Description
Press the Enable softkey to enable or disable the selected measurement. The check box for the measurement will be
Enable
selected when enabled.
Add Measurement
Press the Add Measurement softkey to add measurements.
Delete Measurement
Press the Delete Measurement softkey to delete the selected measurement.
Press the Ed it softkey to move or copy the selected measurement, or paste a copied measurement after the selected
Ed it
measurement.
310
TSA > Project > Test > AC Level menu page
Keysight U8903B User's Guide