Test Sequence; Table 7-4 Tsa > Project > Test Menu Description - Keysight U8903B User Manual

Test Sequence

The TSA > Project > Test menu page is displayed as shown in Figure 7-5.
Figure 7-5
Table 7-4 TSA > Project > Test menu description
Menu Description
Press the Enable softkey to enable or disable the selected test sequence. The check boxes for the test and all the
Enable
measurements in the test will be selected when enabled.
Press the Add Test Sequence softkey to add a test sequence.
– New
Add Test Sequence Add a new test sequence.
– Saved
Load a saved test sequence file. Refer to "Recall" on page
Delete Test Sequence Press the Delete Test Sequence softkey to delete the selected test sequence.
Press the Save softkey to save the test sequence to a file. Refer to "Save" on page
Save
menu page.
Press the Ed it softkey to move or copy the selected test sequence, or paste a copied test sequence after the selected test
Ed it
sequence.
Properties Press the Properties softkey to set the test sequence name.
Keysight U8903B User's Guide
TSA > Project > Test menu page
Test Sequence Application
95 for more information on the Recall menu page.
94 for more information on the Save
7
297