Page 1
Keysight U8903A Audio Analyzer Notice: This document contains references to Agilent. Please note that Agilent’s Test and Measurement business has become Keysight Technologies. For more information, go to www.keysight.com. Quick Start Guide...
Page 2
Printed in Malaysia forth therein, does not require or CONTAINED HEREIN. SHOULD Published by: permit, among other things, that KEYSIGHT AND THE USER HAVE A Keysight: (1) Furnish technical SEPARATE WRITTEN AGREEMENT Keysight Technologies information related to commercial WITH WARRANTY TERMS COVERING...
Earth (ground) terminal manual for specific Warning or Caution information) Protective conductor terminal Caution, hot surface Frame or chassis terminal Out position of a bi-stable push control Equipotentiality In position of a bi-stable push control Keysight U8903A Quick Start Guide...
Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Keysight Technologies assumes no liability for the customer’s failure to comply with these requirements.
Page 5
To avoid the occurrence of additional hazards, do not install substitute parts or perform any unauthorized modification to the product. Return the product to Keysight for service or repair to ensure that the safety features are maintained. – This equipment is under CAT 1 measurement category, do not connect the cable to MAIN.
Storage temperature –40 °C to 70 °C Storage humidity 20% to 80% RH noncondensing at 65 °C The U8903A Audio Analyzer complies with the following safety and EMC CAUTION requirements. – IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition) – Canada: CAN/CSA-C22.2 No. 61010-1-04 –...
Cet appareil ISM est conforme a la this electrical or electronic product in norme NMB-001 du Canada. domestic household waste. The CSA mark is a registered trademark of the Canadian Standards Association. Keysight U8903A Quick Start Guide...
To return this unwanted instrument, contact your nearest Keysight Service Center, or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml for more information. Sales and Technical Support To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: – www.keysight.com/find/U8903A (product-specific information and support, software and documentation updates) –...
In This Guide… 1 Overview of the U8903A This chapter provides a general overview of the U8903A, which includes the initial inspection and product outlook. 2 Basic Operations of the U8903A This chapter gets you started with the basic operation of the U8903A.
Page 10
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight U8903A Quick Start Guide...
Page 16
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight U8903A Quick Start Guide...
Page 17
Quick Start Guide Overview of the U8903A Introduction LXI Class-C Compliant Audio Analyzer Initial Inspection Product Overview This chapter explains how to perform an initial inspection of your U8903A audio analyzer and provides an overview of its front and rear panel functions.
THD + N, SINAD, SNR and noise level, SMPTE intermodulation distortion, difference frequency distortion (DFD), phase, and crosstalk. – Refer to the U8903A Audio Analyzer User's Guide for more details. NOTE – To search for software/firmware updates for your product, go to the Keysight Technical Support website at www.keysight.com/find/TechSupport.
Overview of the U8903A LXI Class-C Compliant Audio Analyzer The U8903A audio analyzer is an LXI Class C compliant instrument, developed using LXI Technology. LXI, an acronym for LAN eXtension for Instrumentation, is an instrument standard for devices that use the Ethernet (LAN) as their primary communication interface.
– Power cord – Shielded LAN cable – USB cable – USB flash storage device – Keysight U8903A Audio Analyzer Quick Start Guide – Keysight U8903A Audio Analyzer Product Reference CD-ROM – Certificate of Calibration Optional accessories The following accessories are available for purchase separately.