Keysight U8903B User Manual page 497

Table A-14 Test sequence menu tree description (continued)
Tab Level 1
Settings: Output
Configuration (Analog)
Settings: Output
Configuration
(Bluetooth)
IO Configuration
Settings: Input
Configuration (Analog)
Keysight U8903B User's Guide
Level 2 Level 3
Max Voltage
Reference Impedance
– None (External)
Channels
– 2
Device
– A2DP
Profiles – HFP
– AVRCP
Link Config
References Volt/FS
Channels
– UnBal
Connector – Bal
– Loopback
– 100 kΩ (for
Unbalanced)
– 200 kΩ (for
Impedance
Balanced)
– 600 Ω
– 300 Ω
– DC
Coupling
– AC
– 90 kHz
Bandwidth
– 1.5 MHz
Voltage
Ratio
Frequency
Reference
Impedance
Sound level
Calibrator level
Appendixes
Description
Set the maximum voltage.
Set the reference impedance for the unit
conversion of dBm measurements.
Select the number of output channels in use.
Select the paired Bluetooth device.
Select the U8903B's Bluetooth card profile.
Configure the Bluetooth link settings.
Set the output references for generator.
Display the number of input channels in use.
Select the input connector type.
Select the input impedance value.
This setting is only available when Connector is
set to UnBal or Bal.
Select the input coupling type.
Select the input bandwidth value.
This setting is only available with Option N3431A.
Set the input voltage value.
Set the input ratio value.
Set the input frequency value.
Set the input impedance value.
Set the input sound level value.
Set the input calibrator level value.
A
497