Preset; Figure 2-21 Preset Menu Page; Table 2-12 Preset Menu Description - Keysight U8903B User Manual

2 Operation and Features

Preset

A preset will set the U8903B to a default state. It does not affect the I/O configuration,
calibration data, system configurations (time, date, model number, and serial number), and
license information.
The Preset menu page is only available in the Standard View mode. Refer to "Menu Key" on
NOTE
page
Figure 2-21
Table 2-12 Preset menu description
Menu Description
Press the (Current mode) softkey to reset the current mode to its default settings. For example, resetting the analog
generator will only reset all the generator settings while other modes settings remain unchanged.
– Analog Analyzer
Resetting the analog analyzer will also reset the analog generator loopback connector.
(Current mode)
– Analog Generator
Resetting the analog generator will not reset the analog generator loopback connector.
– Graph Analysis
Save User State Press the Save User State softkey to save the current user state.
Press the Mode softkey to reset all modes to the default settings without deleting the user-defined files. All running
Mode
operations such as auto query, sweep, and test sequence will be aborted.
Press the To Factory Settings softkey to reset the U8903B to the factory default settings, delete all the files saved in the
To Factory Settings internal flash memory (for example, state file, arbitrary waveform, test sequence project files, and so on), and reset the GUI
state to the Standard View mode. If the HP8903B mode is turned on, the GUI state will remain at the HP8903B mode.
User State Press the User State softkey to reset the U8903B to the previously saved user state.
78
60 for more information.
Preset menu page
Keysight U8903B User's Guide