Io Configuration; Table 7-5 Tsa > Project > Test > Io Configuration Menu Description - Keysight U8903B User Manual

7 Test Sequence Application

IO Configuration

The IO Configuration tab allows you to configure the output and input settings. There will
be one IO Configuration tab in each test sequence. The settings configured in the IO
configuration will be applied to all the measurements in the test sequence. The TSA >
Project > Test > IO Configuration menu page is displayed as shown in Figure 7-6.
Figure 7-6
Table 7-5 TSA > Project > Test > IO Configuration menu description
Menu Description
Press the Add Measurement softkey to add measurements to the selected test sequence. Refer to "Measurements" on
Add Measurement
page
Press the Ed it softkey to paste a copied measurement after the IO configuration. The IO Configuration cannot be moved or
Ed it
copied.
Settings Press the Settings softkey to configure the IO settings. Refer to "Settings" on page
Press the Properties softkey to configure the IO configuration properties. Refer to "Properties" on page
Properties
information.
298
TSA > Project > Test > IO Configuration menu page
310 for more information.
299 for more information.
306 for more
Keysight U8903B User's Guide