Table A-16 Measurement Settings > Frequency Menu Tree Description - Keysight U8903B User Manual

Frequency
Table A-16 Measurement settings > Frequency menu tree description
Tab Level 1
Waveform
Output
Frequency
(Signal Generation)
Waveform Config
Waveform Config
Sample Size
Frequency
(Signal Analysis)
Input Range
Frequency
Keysight U8903B User's Guide
Level 2 Level 3
– Sine
– Variable Phase
– Square
– Arbitrary
Enable
Track 1st Ch
Disable
Frequency
Amplitude
DC Offset
Phase->1st Ch
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Appendixes
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Set the phase value. This setting is only available
when channel 2 is selected.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
chart menu tree.
A
for the bar
505