Keysight U8903B User Manual page 469

Table A-8 Digital analyzer menu tree description (continued)
Level 1 Level 2
Ref. Ratio
Functions
Freq Lock
(X-Talk)
Fund Freq
Clear Filters
LPF
HPF
Filters Config
Weighting
Deemphasis
Sample Rate
Keysight U8903B User's Guide
Level 3 Level 4
– Auto
– Gen Lock
– Custom
– None
– 15 kHz
– 20 kHz
– 22 kHz
– 30 kHz
– Custom
– None
– 20 Hz
– 100 Hz
– 400 Hz
– Custom
– None
– A
– CCIR 1k
– CCIR 2k
– C-Message
– CCITT
– Custom
– None
– 50 μs
– 75 μs
– Custom
– 32 kHz
– 44.1 kHz
– 48 kHz
– 88.2 kHz
– 96 kHz
– 176.4 kHz
– 192 kHz
Appendixes
Description
Set the reference ratio value.
There is only one reference ratio for each channel.
Select the searching method for the fundamental
frequency.
Set the fundamental frequency value.
This setting is only available when the frequency
lock is set to Custom.
Clear all the filter settings.
Select the low-pass filter.
Select the high-pass filter.
Select the weighting filter.
Select the filter de-emphasis value.
Select the sample rate.
A
469