Generator; Table 8-4 Hp8903B > Generator Menu Description - Keysight U8903B User Manual

8 HP8903B

Generator

Select Generator in the HP8903B menu page to configure the HP8903B generator settings.
The generator in the HP8903B generates sine waveform.
NOTE
Figure 8-3
Table 8-4 HP8903B > Generator menu description
Menu Description
Press the Frequency softkey to set the HP8903B generator frequency value. Changing the frequency value will also set the
Frequency
step parameter to frequency.
Press the Amplitude softkey to set the HP8903B generator amplitude value. Changing the amplitude value will also set
Amplitude
the step parameter to amplitude.
Press the Step Param softkey to select the HP8903B generator step parameter type.
Step Param – Frequency
– Amplitude
Press the Freq. Step softkey to set the HP8903B generator frequency step value. This setting is only available when the
Freq. Step
step parameter is set to frequency.
Press the Amp. Step softkey to set the HP8903B generator amplitude step value. This setting is only available when the
Amp. Step
step parameter is set to amplitude.
x 10 Press the x 10 softkey to multiply the current parameter step value by 10.
÷ 10 Press the ÷ 10 softkey to divide the current parameter step value by 10.
412
HP8903B > Generator menu page
Keysight U8903B User's Guide