Measurement 1/Measurement 2
Figure 5-16
Table 5-10
Graph Analysis > Measurement > Measurement 1/Measurement 2 menu description
Menu
Description
Press the Interface softkey to select the measurement interface type.
– Analog Analyzer
Interface
– Digital
– Bluetooth
Channel
Press the Channel softkey to select the desired channel to perform the measurement.
Press the Function No softkey to select the function to be displayed based on the function number (1 to 4). The function
number corresponds to the respective measurement functions in the analyzer. The allowable measurement functions are
as follows.
– Frequency
Function No
– DC voltage
– THD ratio
– THD level
Keysight U8903B User's Guide
Graph Analysis > Measurement > Measurement 1 menu page
Graph Analysis
5
277