Project; Table 7-2 Tsa > Project Menu Description - Keysight U8903B User Manual

Project

The TSA > Project menu page is displayed as shown in Figure 7-3.
Figure 7-3
Table 7-2 TSA > Project menu description
Menu Description
New Project Press the New Project softkey to create a new project.
Press the Open Project softkey to load a project from a file. Refer to "Recall" on page
Open Project
Recall menu page.
Press the Save Project softkey to save the project to a file. Refer to "Save" on page
Save Project
menu page.
Press the Properties softkey to configure the project properties. Refer to "Properties" on page
Properties
on the Properties menu page.
Press the up or down arrow key to select the test sequence, IO configuration, or
measurements tabs. The respective menu page will be displayed. Refer to "Test Sequence"
on page 297, "IO Configuration" on page 298, and "Measurements" on page
information.
Keysight U8903B User's Guide
TSA > Project menu page
Test Sequence Application
95 for more information on the
94 for more information on the Save
296 for more information
310 for more
7
295