Keysight U8903B User Manual page 551

Table A-38 Measurement results > Graph menu tree description (continued)
Level 1 Level 2
Title
Auto Scale
Graph Properties
Left
(This is only applicable
for POLQA
measurement
Right
MOS-LQO and Delay
results)
Top
Bottom
Keysight U8903B User's Guide
Level 3 Description
Edit the graph title.
– On
Enable or disable the X-axis autoscale.
– Off
Set the X-axis left edge value.
This setting is only available when the Autoscale is disabled.
Set the X-axis right edge value.
This setting is only available when the Autoscale is disabled.
Set the X-axis top edge value.
This setting is only available when the Autoscale is disabled.
Set the Y-axis bottom edge value.
This setting is only available when the Autoscale is disabled.
Appendixes A
551