Keysight U8903B User Manual page 492

A Appendixes
Table A-11 Sweep function menu tree description (continued)
Level 1 Level 2
Plot Settings
Edit points
Plot View
Save Pts
492
Level 3 Level 4
– None
– Average
Hold Type
– Max
– Min
Data Channel
– On
Wrap Phase
– Off
Goto Point
Point Value
Add Point
Remove Point
Load Points
Save Points
Description
Select the data type to be plotted in the graph.
Select the trace data channel number to be
plotted.
Enable of disable the wrap phase.
Set the sweep point number to go to.
Set the currently selected sweep point value.
Add a sweep point.
Remove the selected sweep point.
Load the sweep points from a file.
Refer to "Append ix 13: Recall Menu Tree" on
page 494 for the recall menu tree.
Save the sweep points to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Save the sweep points to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Keysight U8903B User's Guide