Audio Analyzer Measurement Functions
4
DC voltage level measurement
Ensure that the input coupling is set to DC before measuring DC voltage level. Refer to
NOTE
"Input Configuration (Analog Analyzer)" on page
246
and "Measurement Configuration
(Digital Analyzer)" on page
240
for more information.
DC voltage levels are often encountered in audio equipment although they are not part of
the audio signal, for example, bias voltages and outputs from AC-to-DC converters. DC
voltage is expressed in volts (V). The input coupling must be set to DC for DC voltage level
measurement.
DC voltage level measurement function mode is applicable for the analog, digital, and
Bluetooth analyzer. The settings for DC voltage level measurement are displayed as shown
in Figure 4-15, Figure 4-16, and Figure 4-17 for the analog, digital, and Bluetooth
analyzer respectively.
Figure 4-15
Analog Analyzer > Functions > DC Voltage menu page 1
Keysight U8903B User's Guide
191