Test Sequence Application - Keysight U8903B User Manual

Test Sequence Application

The U8903B test sequence application (Test Seq App) mode allows you to create a series of
automated measurements on a DUT. You can customize the order in which the
measurements are performed, edit the pass or fail limits, add sub steps, and create a
detailed report of the measurements.
There are two main tabs in the test sequence application mode: Project tab and Report tab.
The Project tab allows you to add up to 20 test sequence and configure the measurements
in each test sequence. The Report tab allows you to display all the measurements results
and generate a report.
Use the left and right arrow keys to switch between the Project tab or Report tab. Refer to
"Project" on page
An example of the Project tab menu page is displayed as shown in Figure 7-1.
Figure 7-1
Keysight U8903B User's Guide
295 and "Report" on page
TSA > Project menu page
Test Sequence Application
403 for more information.
7
293