Keysight U8903B User Manual page 448

A Appendixes
Table A-6 Bluetooth generator menu tree description (continued)
Level 1 Level 2
Common Settings
Link Config
A2DP Settings
448
Level 3 Level 4
– A2DP SRC, HFP AG,
AVRCP TRGT
Profile
– A2DP SNK, HFP HF,
AVRCP CTRL
Friendly Name
Device PIN
– Auto
Device Class
– Custom
Custom
– Just Works
SSP Mode
– Man-In-The-Middle
Auto Pair
Discoverable
Connectable
Loopback
Link Status
– RF1
RF Port
– RF2
– SBC
Codec
– apt-X
– 16 kHz
– 32 kHz
Sampling Rate
– 44.1 kHz
– 48 kHz
Description
Select the U8903B's Bluetooth card profile.
Set the friendly name of the U8903B's Bluetooth card.
Set the passkey of the U8903B's Bluetooth card.
Select the device class based on the configured profile.
Set the device class.
Select the U8903B's Bluetooth card simple secure
pairing mode.
Enable or disable the auto-pairing function.
Enable or disable the discoverability function of the
U8903B's Bluetooth card.
Enable or disable the connectability function of the
U8903B's Bluetooth card.
Enable or disable the integrated interchip sound audio
loopback function.
Enable or disable the link status of the U8903B's
Bluetooth card.
Select the U8903B's Bluetooth card RF port connector.
Select the codec for the A2DP profile.
Select the audio sampling rate for the A2DP profile.
Keysight U8903B User's Guide