Configuration | D&I - Comtech EF Data CDM-425 Installation And Operation Manual

7.5.4.3.8 Configuration | D&I
Chapter 6. FRONT PANEL OPERATION
Appendix E. CLOCK MODES
Figure 7-33. Configuration | D&I Page (Selected Framing Mode = D&I)
The appearance of this page is dependent on the framing mode selected on the 'Configuration |
Modem' page (Sect. 7.5.4.3.1). See Chapter 6. FRONT PANEL OPERATION for D&I
configuration information and Appendix E. CLOCK MODES
D&I functionality overview.
If the selected framing mode is D&I++, the section heading and the available parameters adjust
accordingly:
Ethernet-based Remote Product Management
CDM-425 Advanced Satellite Modem
DROP INSERT (D&I)
AND AND
AND
7–66
Revision 0
DROP INSERT (D&I) for
AND
MN-CDM-425