Table of Contents
Advertisement
MetaCarrier Info
•
MAC Address: This parameter is read-only and cannot be changed.
•
Latitude: Enter a value, for degrees, from 0 to 90. Enter a value, for minutes, from 00.00
to 59.99. Use the drop-down list to select N (North) or S (South).
•
Longitude: Enter a value, for degrees, from 0 to 180. Enter a value, for minutes, from
00.00 to 59.99. Use the drop-down list to select E (East) or W (West).
•
Telephone Number: Enter a phone number. Valid characters are +, x, 0-9.
•
Custom Message: Enter a MetaCarrier Custom Message as needed, up to 24
characters.
You may use the following characters to compose this string:
[Space] ( ) * + - , . / 0-9 and A-Z.
The MetaCarrier Custom Message, as created here, also appears in the title bar of
compatible web browsers for easy unit identification.
•
Carrier ID State: Use the drop-down list to set Carrier ID operation as ON or OFF.
Click [Submit] to save.
Ethernet-based Remote Product Management
It is IMPORTANT to understand that the Carrier ID and MetaCarrier
Custom Message are two distinct features of the CDM-425. Read your
documentation carefully.
With Carrier ID Enabled, the first 24 characters of the 40-character
Circuit ID are intended for and sent as the MetaCarrier Custom
Message. While you must limit your MetaCarrier Custom Message to 24
characters or less, the full 40 characters of the Circuit ID will display on
the front panel screen saver (see Sect. 6.1.3.1 Screen Saver).
CDM-425 Advanced Satellite Modem
7–65
Revision 0
MN-CDM-425
Advertisement
Table of Contents
