Table of Contents
Advertisement
CONFIG: D&I Drp-Type or Ins-Type
The available Frame Format types for Drop or Insert are:
Frame Format (Type)
T1-D4
T1-ESF
E1-CCS
E1-CAS
Use the ▲▼ arrow keys to select the desired Drop-Type or Insert-Type. Press ENTER.
CONFIG: D&I (Drop or Insert) Chan/TS (Channel Timeslots)
Drp-Ch:
Ins-Ch:
Use the▲▼ arrow keys to select the number of Drop or Insert Channel Timeslots, from na to 24.
Press ENTER.
The number of available Channel Timeslots depends on the data rate:
•
If the data rate is 1920 kbps and the framing is D&I, then only the E1 formats are
available and the Chan/TS menus are disabled. This is the 'Fixed Channel Mode' where
all timeslots are allocated in order. D&I++ does not have 'Fixed Channel Mode'.
•
If the framing is D&I and Drop/Insert Type is E1-CAS, Timeslot 16 is used solely for CAS
signaling and therefore may not be allocated for traffic data.
CONFIG: D&I Loop
Select Loop to tie Drop Data Out (DDO) to Insert Data Input (IDI) without having to externally
connect cables to these ports. Use the ▲▼ arrow keys to select Y(es) or N(o) for the Loop
feature.
Front Panel Operation
1
TS: 01
1
TS: 01
CDM-425 Advanced Satellite Modem
Description
T1 D4 Framing
T1 Extended Super Frame Framing
E1 Common Channel Signaling Framing
R1 Channel Associated Signaling Framing
6–36
Revision 0
MN-CDM-425
Advertisement
Table of Contents
