Comtech EF Data CDM-425 Installation And Operation Manual page 511

10.3.3.3.3.1.4 ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info
Info:
These read-only screens provide the ODU's current configuration information without risking
inadvertent changes.
Use the ◄ ►arrow keys to select Model, Tx, Rx, Misc, or LNA, and then press ENTER.
After viewing any CSAT/CSAT#X Info screen, press ENTER or CLEAR to return to the previous
menu.
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  Model
Model:
S/N:
Use this screen to view the CSAT model number, its operating firmware, and the unit serial
number.
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  Tx
Info:
Use this screen to view the Tx state, Frequency, Tx Attenuation, Amplifier state, Tx Mute state
and Tx Slope adjustment (value or CAL).
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  Rx
Info:
Use this screen to view the Rx state, Rx Frequency, Rx Attenuation, Rx Reference, Rx Mute state
and Rx Slope adjustment (value or CAL).
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  Misc
Info:
ODU (Transceiver, BUC, LNB) Operation
Model Tx Rx
CSAT-5060/025
010300346
Tx:Off 6427.0MHz
Amp:Off Unmuted
Rx:ON 3400.0MHz
Ref:087 Unmuted
Cold-Start:Off
Auto-Fault-Recovery:Summary
CDM-425 Advanced Satellite Modem
Misc LNA
V2.19
23.00dB
Slope:0.3
18.00dB
Slope:0.2
10–21
Revision 0
()
(EC)
MN-CDM-425