Table of Contents
Advertisement
7.5.4.2.4
Admin | Reboot
Use this page to perform a soft reboot of the modem using the current, active firmware Image as
selected on the 'Admin | Firmware | Base Modem' page (Sect. 7.5.4.2.3.1) and/or the 'Admin |
Firmware | Packet Processor' page (Sect. 7.5.4.2.3.2).
Click [Reboot Now] to perform the soft reboot of the modem. The page updates to indicate the
reboot in progress.
Depending on the number of installed hardware and firmware options, it may take up to one
minute for soft reboot to execute. Once the "splash" screen appears, you must log in to begin a
new HTTP Interface session:
1. Click [OK] on the 'Rebooting' page to complete the reboot process.
2. Upon reboot, you will need to refresh your browser window. Once the Login window
appears, type in your User name and Password.
3. Click [OK] in the Login window; the browser window will refresh to show the HTTP
Interface "splash" (Home) page.
4. Select any navigation tab to resume your session.
Ethernet-based Remote Product Management
Figure 7-10. Admin | Reboot Page
7–25
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Advertisement
Table of Contents
