Table of Contents
Advertisement
•
CDM-425 MIB Compatibility: Use the drop-down list to select as Disabled or Enabled.
•
This feature is available only when the optional IP Packet Processor is installed and
enabled. When enabled, you may use CDM-425 MIBs to monitor and control features.
•
SNMP Access Level: Use the drop-down list to select Read and Write (default) or Read
Only.
Click [Submit Admin] to save.
7.5.4.2.3
Admin | Firmware
Chapter 4. UPDATING FIRMWARE
Click the Base Modem tab, or, when the optional IP Packet Processor card is installed, the
Packet Processor tab to continue.
Admin | Firmware | Base Modem
Use this page to view the scrollable, read-only status windows that provide information about the
basic unit's two loaded and operational firmware images.
Ethernet-based Remote Product Management
Figure 7-8. Admin | Firmware | Base Modem Page
7–22
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Advertisement
Table of Contents
