Home > Administration > Restore Factory Defaults - Comtech EF Data CDM-425 Installation And Operation Manual

9.3.2.7 Home > Administration > Restore Factory Defaults
Open the Restore Factory Default page from the Administration submenu. Use this page to
restore the CDM-425 settings to the original settings as shipped from the factory.
Hot
Key
A
Restore Factory Defaults
Press [A] to open the Restore Factory Defaults dialog window. Otherwise, press [ESC] to return
to the Administration submenu.
By selecting Restore, the unit proceeds with restoration of factory defaults. Wait while the unit
reboots.
You must restart your Telnet CLI session upon reboot of the CDM-425.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Option Entry
Use the ↑↓ arrow keys to set as Cancel (default) or Restore
9–23
Revision 0
MN-CDM-425