Table of Contents
Advertisement
2. Each dialog windows provides cues to
ensure proper configuration of the unit. If
you enter an invalid parameter, the CLI
rejects the entry and displays an error
message at the bottom of the window,
as shown in this example:
Here, the CLI rejects the attempted entry of 6 and displays the message "Number is out of
range". Re-enter a new value (in this example, a value within the acceptable ranges of 0
and 8-32) and then press [ENTER] to continue. Otherwise, press [ESC] to quit the dialog
window and return to the configuration page. You may then proceed with further
configuration updates.
3. Any menu item that has been changed since the previous save gets appended with an
asterisk [*], as "CnC Mode" shows in this example:
4. Press [F8] to save any changes to the modem memory. If you press [ESC] after changes
have been made – but not saved – on a page, the Unsaved Changes window opens to
force further action.
Telnet Command Line Interface (CLI) Operation
Figure 9-1. Unsaved Changes Window
9–9
CDM-425 Advanced Satellite Modem
MN-CDM-425
Revision 0
Advertisement
Table of Contents
