Open the Base Modem and Packet Processor Firmware pages from the Administration submenu.
Use these pages to view the current firmware information, or to select the alternate firmware
image to be loaded at startup or reboot. Both pages contain the following option:
Hot
Key
A
Boot From
Press the hot key to open the dialog window. Otherwise, press [ESC] to return to the
Administration submenu.
You must reboot the unit in order for the new firmware image load selection to
take effect.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Option Entry
Use the ↑↓ arrow keys to set load as Image1 or Image2
9–18
Revision 0
MN-CDM-425