Table of Contents
Advertisement
10.3.3.3.3.4 ODU: FSK-control BUC
The menus that follow assume that you have selected and the system has
identified a BUC connected via the Tx IF port.
BUC controls via FSK:
Configuration
Use the ◄ ►arrow keys to select Configuration, Status, or Advanced-FSK, and then press
ENTER.
10.3.3.3.3.4.1 ODU: FSK-control BUC Configuration
BUC: Tx:On
Use the ◄ ►arrow keys to select Tx: or Addr:
On the top line – For Tx: use the ▲▼ arrow keys to select Off or On.
On the bottom line – For Addr: use the ▲▼ arrow keys to select an address from 01 to 15.
Press ENTER when done.
10.3.3.3.3.4.2 ODU: FSK-control BUC Status
BUC: Pwr=16.2dBm=00.0W
This screen provides read-only status information for the BUC setup.
Press ENTER or CLEAR to return to the previous menu.
10.3.3.3.3.4.3 ODU: FSK-control BUC Advanced-FSK
Advanced FSK:
CEFD BUC Type: LPOD
Use the ▲▼arrow keys to select LPOD or 2LPODs, and then press ENTER.
ODU (Transceiver, BUC, LNB) Operation
Status
(Off,On)
Addr:01 (1-15)
PLL=locked
+045°C
CDM-425 Advanced Satellite Modem
Advanced-FSK ()
()
Pclass=5 W
Sw-Ver=01
(LPOD,2LPODs)
10–27
Revision 0
()
MN-CDM-425
Advertisement
Table of Contents
