Odu Operations Using The Telnet Cli; 10.5.1.1 Home (Main) Menu - Comtech EF Data CDM-425 Installation And Operation Manual

Figure 10-17. Telnet Command Line Interface (CLI) PuTTY Example
10.5.1

ODU Operations using the Telnet CLI

1. ODU Comms must be Enabled, and the CDM-425 must be configured for
2. The Comtech EF Data KST-2000A/B Transceiver and LPOD Amplifier /

10.5.1.1 Home (Main) Menu

ODU (Transceiver, BUC, LNB) Operation
70/140 MHz operation in order to fully use the Telnet CLI ODU menus.
Block Up Converter are not supported by the Telnet CLI at this time.
CDM-425 Advanced Satellite Modem
10–56
Revision 0
MN-CDM-425