Comtech EF Data CDM-425 Installation And Operation Manual page 506

10.3.3.3.3.1.1.1 ODU: FSK-control
Tx: Fq=6247.0 MHz
Mute=Unmuted
Use the ◄ ►arrow keys to select a setting, and then use the ▲▼ arrow keys to change that
setting:
Selection
Fq
At
Amp
Mute
Slope
Press ENTER to save, or CLEAR to cancel and return to the previous menu.
10.3.3.3.3.1.1.2 ODU: FSK-control
Rx: Fq=6427.0 MHz
Mute=Unmuted
Use the ◄ ►arrow keys to select a setting, and then use the ▲▼ arrow keys to change that
setting:
Selection
Fq
Att
Mute
Slope
Press ENTER when done.
ODU (Transceiver, BUC, LNB) Operation
 
CSAT (2CSATs
Att=23.00 dB Amp=On
Slope: xxx, Cal
(Tx Frequency) 3625-4200 MHz, in steps of 1.0 or 2.5 MHz
(Tx Attenuation ) 0 to 25 dB, in increments of .25dB
(Amplifier setting ) Off or On
(Mute setting) Muted (i.e., Tx off) or Unmuted (i.e., Tx on)
Manual (0.0 to 1.0, in increments of 0.1) or Calibrated
 
CSAT (2CSATs
Att=23.00 dB
Slope:x.x, Cal()
(Rx Frequency) 3625-4200 MHz, in steps of 1.0 or 2.5 MHz.
(Rx Attenuation) 0 to 25 dB, in increments of .25dB.
(Mute setting) Muted (i.e., Tx off) or Unmuted (i.e., Tx on).
Manual (0.0 to 1.0, in increments of 0.1) or Calibrated.
10–16
CDM-425 Advanced Satellite Modem

CSAT #X) Configuration
()
Setting

CSAT #X) Configuration
Setting
Revision 0

Tx

Rx
MN-CDM-425