Hub-To-Remotes Using Ethernet Switches Or Routers - Comtech EF Data CDM-425 Installation And Operation Manual

I.2.3.1.3

Hub-to-Remotes Using Ethernet Switches or Routers

Figure I-6. Hub-to-Remotes with Standard Traffic Using Routers or Switches
Figure I-6 shows a hub-to-remotes configuration using switches or routers with standard Ethernet
traffic, the routers/switches will block broadcasts coming from the hub and remote networks;
therefore, the creation of a broadcast storm is prevented and there is no possibility of having a
remote MAC on the Hub networks.
Appendix I
CDM-425 Advanced Satellite Modem
I–6
Revision 0
MN-CDM-425