Buc Parameters (L-Band Device) - Comtech EF Data CDM-425 Installation And Operation Manual

8.5.8

BUC Parameters (L-Band Device)

Command
Number of
Parameter (Instruction
Arguments
& Qualifier)
BUC BPS= 1 byte,
Power Supply 0 or 1
enable
BUC BFR= 1 byte
10 MHz
Reference
BUC BCL= 4 bytes
Current
Low Limit
BUC BCH= 4 bytes
Current
High Limit
BUC BAD= 1 byte, 1 thru 15
Address
BUC BOE= 1 byte, 0 or 1
Output Power
Enable
BUC N/A 4 bytes
DC
Current
BUC N/A 4 bytes
Voltage
BUC N/A 4 bytes
Output Power
Level
Serial Remote Control
Description of Arguments
Command or Query.
Sets or returns BUC Power Supply control in the form x. where:
0=Disable the BUC DC Power Supply
1=Enable the BUC DC Power Supply
Command or Query.
Sets or returns BUC !0 MHz Reference the form x, where:
0=OFF
1=ON
Command or Query.
Sets or returns BUC Current Low Limit, in the form xxxx, where:
xxxx=Value, in 100 mA increments, from 0000 thru 4000 mA
Command or Query.
Sets or returns BUC Current High Limit, in the form xxxx, where:
xxxx=Value, in 100 mA increments, from 0000 thru 4000 mA
Command or Query.
Sets or returns BUC Address in the form xx, where:
xx=Value 01-15.
NOTE: This command is only valid when the FSK is enabled.
Command or Query.
Sets or returns BUC Tx Carrier Output Power function in the form x, where:
0=OFF
1=ON
NOTE: This command is only valid when the FSK is enabled.
Query only.
Returns BUC DC current in the form xxxx, where:
xxxx=Value, in mA, from 0000 and 9999.
NOTE: If not available, response is 0000.
Query only.
Returns BUC Voltage in the form xx.x, where:
xx.x=Value, in volts, from 00.0 thru 64.0
Query only.
Returns BUC Output Power Level in the form xx.x, where:
xx.x=Value, in dBm.
NOTE: Returns xxxx when FSK is not enabled.
EXAMPLE: <0/BOL? >0000/BOL=37.4
8–58
CDM-425 Advanced Satellite Modem
Revision 0
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
BPS= BPS? BPS=x
BPS? (see Description of
BPS* Arguments)
BPS#
BFR= BFR? BFR=x
BFR? (see Description of
BFR* Arguments)
BFR#
BCL= BCL? BCL=xxxx
BCL? (see Description of
BCL* Arguments)
BCL#
BCH= BCH? BCH=xxxx
BCH? (see Description of
BCH* Arguments)
BCH#
BAD= BAD? BAD=xx
BAD? (see Description of
BAD* Arguments)
BAD#
BOE= BOE? BOE=x
BOE? (see Description of
BOE* Arguments)
BOE#
N/A BDC? BDC=xxxx
(see Description of
Arguments)
N/A BDV? BDV=xx.x
(see Description of
Arguments)
N/A BOL? BOL=xx.x
(see Description of
Arguments)
MN-CDM-425