CONNECTORS
3.1
Cabling Connection Types
The CDM-425 Advanced Satellite Modem uses a number of different cables. Each cable type is
typically dedicated to a specific mode of operation types – see Section 3.2.
1. Not all of these operational interface types may be available.
2. The European EMC Directive (EN55022, EN50082-1) requires using properly
shielded cables for DATA I/O. These cables must be double-shielded from
end-to-end, ensuring a continuous ground shield.
3.1.1 Coaxial Cable Connections
Coupling Type
Bayonet
(Type 'BNC' shown)
Threaded
(Type 'N' shown)
Rear Panel Connectors and Pinouts
Chapter 3. REAR PANEL
Plug
Figure 3-1. Coaxial Connector Examples
3–1
CDM-425 Advanced Satellite Modem
PINOUTS
AND
Connector Type
Jack
Revision 0
MN-CDM-425
Need help?
Do you have a question about the CDM-425 and is the answer not in the manual?
Questions and answers