9.3.4.11 Home > Network > Sntp - Comtech EF Data CDM-425 Installation And Operation Manual

9.3.4.11 Home > Network > SNTP
Open the SNTP page from the Network submenu. This page contains the following options:
Hot
Key
A SNTP Enable
B SNTP Primary Server
C
SNTP Backup Server
[R/O] SNTP Primary Last Update
[R/O] SNTP Backup Last Update
D RTC Time
E
RTC Date
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Network
submenu.
Telnet Command Line Interface (CLI) Operation
Dialog Window
CDM-425 Advanced Satellite Modem
Option Entry
Use the ↑↓ arrow keys to select Disabled or Enabled
Typical for either entry – Enter an IP Address in the form
XXX.XXX.XXX.XXX
This read-only entry displays the date/timestamp of the last
update – otherwise, if no updates have occurred, the entry will
read "Never".
This read-only entry displays the date/timestamp of the last
update – otherwise, if no updates have occurred, the entry will
read "Never".
Enter a time in the form HH:MM:SS
Enter a date in the form DD:MM:YY
9–60
Revision 0
MN-CDM-425