Comtech EF Data CDM-425 Installation And Operation Manual page 393

Next, log in to the Telnet CLI using a valid Username and Password:
•
The default Username is: comtech
•
The default Password is comtech
The Telnet CLI Home menu should now be accessible:
1. In order to use the Telnet CLI to make configuration changes to the
2. PuTTY in Linux may require the following setting to render correctly:
Telnet Command Line Interface (CLI) Operation
modem, Remote Access Mode should always be set to [Ethernet].
Settings > Window > Translation > Override with UTF-8 if locale says so
[UNCHECK]
CDM-425 Advanced Satellite Modem
9–3
Revision 0
MN-CDM-425