Comtech EF Data CDM-425 Installation And Operation Manual page 512

Use this screen to view the Cold Start and Auto Fault Recovery settings.
ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Info  LNA
Info:
Use this screen to view the Low Noise Amplifier operational settings.
10.3.3.3.3.2 ODU: FSK-control  2CSATs
The menus that follow assume that you have selected and the system has
identified two CSATs connected via the Rx IF port and the ODU Redundancy
Controller Box.
1:1 Monitor & Control
CSAT#1
Use the ◄ ►arrow keys to select CSAT#1, CSAT#2, or Redundancy-Box, and then press
ENTER.
10.3.3.3.3.2.1 ODU: FSK-control  2CSATs  CSAT#X
This submenu and its nested menus are identical in form and function for the
following menu structures:
ODU: FSK-control
ODU: FSK-control
CSAT-5060/050 V1.02
Configuration
Use the ◄ ►arrow keys to select Configuration, Monitor, Alarms, or Info, and then press
ENTER.
Sect. 10.3.3.3.3.1 ODU: FSK-control
nested menu choices.
ODU (Transceiver, BUC, LNB) Operation
LNA:Off Fault-Logic:Summary
Window:48%
CSAT#2 Redundancy-Box
 
CSAT
 
2CSATs CSAT#X
Monitor

10–22
CDM-425 Advanced Satellite Modem
(EC)
()

(where CSAT#X = CSAT#1, CSAT#2)
Alarms Info ()
CSAT for complete information for these
Revision 0
MN-CDM-425