Table of Contents
Advertisement
Command
Number of
Parameter
(Instruction
Arguments
& Qualifier)
Drop & Insert
DNI=
51 bytes
Drop & Insert
DIC=
67 bytes
Configuration
(31 channels)
Serial Remote Control
Description of Arguments
Command or Query. (D&I only)
Sets or returns D&I in the form ddddddddddddddddddddddddtiiiiiiiiiiiiiiiiiiiiiiiiTL, where:
25 bytes of Drop information (ddddddddddddddddddddddddt) where:
d=24 channels (bytes) defining Drop Timeslot information
t=Drop type: 0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS, as DTY
25 bytes of Insert information (iiiiiiiiiiiiiiiiiiiiiiiiT) where:
i=24 channels (bytes) defining Insert Timeslot infromation
T=Insert type: 0=T1-D4, 1=T1-ESF, 2=E1-CCS, 3=E1-CAS, as ITY
Typical for Drop or Insert Timeslot definition:
0=Unused
z=Timeslot 0 (zero)
1-9=Timeslots 1 through 9
A=Timeslot 10 through V=Timeslot 31
L=D&I Internal Loop: 0=OFF, 1=ON
EXAMPLE: <0/DNI=123456789ABC0000000000003123456789ABC00000000000031
(Drop channels 1-12 using timeslots 1-12, and unused channels 13-24. Same for Insert. E1-CAS,
D&I types, Internal Loop ON).
NOTE: If framing is D&I and data rate is 1920 kbps and DNI Type is E1-CCS or E1-CAS, then channels
cannot be programmed (i.e. FIXED CHANNEL MODE).The DNI? response will display all 'x' in the time-slot
positions.
Command or Query. (D&I++ only)
Sets or returns D&I++ in the form
dddddddddddddddddddddddddddddddxxsssssssssssssssssssssssssssssssxxL where:
31 bytes of Drop Information (dddddddddddddddddddddddddddddddxx) where:
d=31 channels (bytes) defining Drop Timeslot information
PLUS xx=spares
31 bytes of Insert Information (sssssssssssssssssssssssssssssssxx) where:
s=31 channels (bytes) defining Insert Timeslot information
PLUS xx=spares
Typical for Drop or Insert Timeslot definition:
0=Unused
z=Timeslot 0 (zero)
1-9=Timeslots 1 through 9
A=Timeslot 10 through V=Timeslot 31
L=D&I Internal Loop: 0=OFF, 1=ON
EXAMPLE:
<0/DIC=123456789ABCDEFGHIJKLMNOPQRSTUVxx123456789ABCDEFGHIJKLMNOPQRSTUVxx0
(Drop channels 1-32 using timeslots 1-31 and timeslot zero. Same for Insert. E1-CCS, Internal Loop
Off.)
8–45
CDM-425 Advanced Satellite Modem
Revision 0
Response
Query
to
(Instruction &
Response to Query
Command
Qualifier)
DNI=
DNI?
DNI=ddddddddddddddd
DNI?
DNI?n
dddddddddtiiiiiiiiiiiiiiiiiiiiiiiiT
DNI*
(where n=0 thru
L
DNI#
9. Returns the
(see Description of
DNI portion of 1
Arguments)
of 10 stored
configurations)
(Returns current D&I
Configuration)
DIC=
DIC?
DIC=ddddddddddddddd
DIC?
DIC?n
ddddddddddddddddxxss
DIC*
(where n=0 thru
ssssssssssssssssssssss
DIC#
9.
sssssssxxL
Returns the DIC
(see Description of
portion of 1 of 10
Arguments)
stored
configurations)
MN-CDM-425
Advertisement
Table of Contents
