Table of Contents
Advertisement
O.4.1
RADIUS Operation Using the Front Panel
Chapter 6. FRONT PANEL OPERATION
Refer to Chapter 6. FRONT PANEL OPERATION for instructions on how to use RADIUS using
the modem's front panel.
•
Access to and operation of the CDM-425 Advanced Satellite Modem Front
Panel is not controlled by RADIUS.
•
Control of RADIUS operations from the front panel is limited only to enabling
and disabling the feature.
O.4.2
RADIUS M&C Using the HTTP (Web Server) Interface
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
The Admin pages are available only if you log in using the Administrator Name
and Password.
Refer to Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT for instructions
on using RADIUS.
Configuration of RADIUS features is possible only using the HTTP (web server) interface Admin |
Access page.
O.4.3
RADIUS M&C Using Telnet
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
•
Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
The RADIUS commands/queries are available only if you log in to the Telnet
Remote Control Interface (not to be confused with the Telnet CLI – Command Line
Interface) using the Administrator Name and Password.
Refer to Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT and Chapter 8.
SERIAL-BASED REMOTE PRODUCT MANAGEMENT for instructions on using RADIUS.
Configuration of RADIUS features is possible only using Telnet remote commands.
Appendix O
CDM-425 Advanced Satellite Modem
O–6
Revision 0
MN-CDM-425
Advertisement
Table of Contents
