Table of Contents
Advertisement
The CDM-425 Advanced Satellite Modem, its optional Installation and Operation Manual
(otherwise available online at http://www.comtechefdata.com), and its power cord were packaged
and shipped in a reusable cardboard carton containing protective foam spacing.
CAUTION – THIS EQUIPMENT CONTAINS PARTS AND ASSEMBLIES SENSITIVE
TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). USE ESD
PRECAUTIONARY PROCEDURES WHEN HANDLING THE EQUIPMENT.
Once opened, inspect the shipment.
Step
1
Keep all shipping materials.
2
Check the packing list to make sure the shipment is complete.
Inspect the equipment for damage. If damage exists, immediately contact the carrier and
3
Comtech EF Data to submit a damage report.
4
Read the manual.
2.2
Modem - Rack Enclosure Installation
Mount the modem into its assigned position in the rack enclosure (Figure 2-2). Use, as required:
•
A standard rack-mounted shelf;
•
User-supplied screws to secure the front panel to the rack enclosure threaded front
mounting rails;
•
Comtech EF Data's optional KT/6228 (4") or KT/6228 (10") Rear-Mounting Support
Brackets Kit (Figure 2-3).
Installation
CDM-425 Advanced Satellite Modem
Task
2–2
Revision 0
MN-CDM-425
Advertisement
Table of Contents
